cbmk/include/rom.sh
Leah Rowe 121f3e304e re-affirm SeaGRUB as the primary payload
GRUB-as-primary was temporarily allowed in lbmk, because of
a temporary SeaBIOS bug on a machine that canoeboot doesn't
actually support yet, namely the 3050 Micro.

This same diff was also applied to lbmk, but lbmk also applied
changes to a coreboot config for the aforementioned mainboard.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-10-31 19:29:33 +00:00

182 lines
5.8 KiB
Bash

#!/usr/bin/env sh
# SPDX-License-Identifier: GPL-3.0-or-later
# Copyright (c) 2014-2016,2020-2021,2023-2024 Leah Rowe <leah@libreboot.org>
# Copyright (c) 2021-2022 Ferass El Hafidi <vitali64pmemail@protonmail.com>
# Copyright (c) 2022 Caleb La Grange <thonkpeasant@protonmail.com>
# Copyright (c) 2022-2023 Alper Nebi Yasak <alpernebiyasak@gmail.com>
# Copyright (c) 2023 Riku Viitanen <riku.viitanen@protonmail.com>
mkserprog()
{
[ "$_f" = "-d" ] && return 0 # dry run
basename -as .h "$serdir/"*.h > "$TMPDIR/ser" || $err "!mk $1 $TMPDIR"
while read -r sertarget; do
[ "$1" = "rp2040" ] && x_ cmake -DPICO_BOARD="$sertarget" \
-DPICO_SDK_PATH="$picosdk" -B "$sersrc/build" "$sersrc" \
&& x_ cmake --build "$sersrc/build"
[ "$1" = "stm32" ] && x_ make -C "$sersrc" \
libopencm3-just-make BOARD=$sertarget && x_ make -C \
"$sersrc" BOARD=$sertarget; x_ mkdir -p "bin/serprog_$1"
x_ mv "$serx" "bin/serprog_$1/serprog_$sertarget.${serx##*.}"
done < "$TMPDIR/ser"
[ "$XBMK_RELEASE" = "y" ] && mkrom_tarball "bin/serprog_$1"; return 0
}
copyps1bios()
{
x_ rm -Rf bin/playstation
x_ mkdir -p bin/playstation
x_ cp src/pcsx-redux/src/mips/openbios/openbios.bin bin/playstation
printf "MIT License\n\nCopyright (c) 2019-2024 PCSX-Redux authors\n\n" \
> bin/playstation/COPYING.txt || $err "!pcsx-redux copyright"
cat config/snippet/mit >>bin/playstation/COPYING.txt || $err "!pcsx MIT"
}
mkpayload_grub()
{
eval `setvars "" grub_modules grub_install_modules`
$dry eval `setcfg "$grubdata/module/$tree"`
$dry x_ rm -f "$srcdir/grub.elf"; $dry \
"$srcdir/grub-mkstandalone" --grub-mkimage="$srcdir/grub-mkimage" \
-O i386-coreboot -o "$srcdir/grub.elf" -d "${srcdir}/grub-core/" \
--fonts= --themes= --locales= --modules="$grub_modules" \
--install-modules="$grub_install_modules" \
"/boot/grub/grub_default.cfg=${srcdir}/.config" \
"/boot/grub/grub.cfg=$grubdata/memdisk.cfg" \
"/background.png=$grubdata/background/background1280x800.png" || \
$err "$tree: cannot build grub.elf"; return 0
}
mkvendorfiles()
{
[ -z "$mode" ] && $dry cook_coreboot_config
check_coreboot_utils "$tree"
printf "%s\n" "${version%%-*}" > "$srcdir/.coreboot-version" || \
$err "!mk $srcdir .coreboot-version"
}
cook_coreboot_config()
{
[ -f "$srcdir/.config" ] || return 0
printf "CONFIG_CCACHE=y\n" >> "$srcdir/.config" || \
$err "$srcdir/.config: Could not enable ccache"
make -C "$srcdir" oldconfig || $err "Could not cook $srcdir/.config"; :
}
check_coreboot_utils()
{
for util in cbfstool ifdtool; do
[ "$badhash" = "y" ] && x_ rm -f "elf/$util/$1/$util"
e "elf/$util/$1/$util" f && continue
utilelfdir="elf/$util/$1"
utilsrcdir="src/coreboot/$1/util/$util"
utilmode="" && [ -n "$mode" ] && utilmode="clean"
x_ make -C "$utilsrcdir" $utilmode -j$XBMK_THREADS $makeargs
[ -z "$mode" ] && [ ! -f "$utilelfdir/$util" ] && \
x_ mkdir -p "$utilelfdir" && \
x_ cp "$utilsrcdir/$util" "elf/$util/$1"
[ -z "$mode" ] || x_ rm -Rf "$utilelfdir"; continue
done; return 0
}
mkcorebootbin()
{
[ "$target" = "$tree" ] && return 0
tmprom="$TMPDIR/coreboot.rom"
$dry x_ cp "$srcdir/build/coreboot.rom" "$tmprom"
initmode="${defconfig##*/}"; displaymode="${initmode##*_}"
initmode="${initmode%%_*}"
[ -n "$displaymode" ] && displaymode="_$displaymode"
cbfstool="elf/cbfstool/$tree/cbfstool"
[ -n "$uboot_config" ] || uboot_config="default"
[ "$payload_uboot" = "y" ] || payload_seabios="y"
[ "$payload_grub" = "y" ] && payload_seabios="y"
[ "$payload_seabios" = "y" ] && [ "$payload_uboot" = "y" ] && \
$dry $err "$target: U-Boot and SeaBIOS/GRUB are both enabled."
[ -z "$grub_scan_disk" ] && grub_scan_disk="nvme ahci ata"
[ -n "$grubtree" ] || grubtree="default"
grubelf="elf/grub/$grubtree/payload/grub.elf"
[ "$payload_memtest" = "y" ] || payload_memtest="n"
[ "$(uname -m)" = "x86_64" ] || payload_memtest="n"
if $dry grep "CONFIG_PAYLOAD_NONE=y" "$defconfig"; then
[ "$payload_seabios" = "y" ] && pname="seabios" && \
$dry add_seabios
[ "$payload_uboot" = "y" ] && pname="uboot" && $dry add_uboot
else
pname="custom" && $dry cprom; :
fi; :
}
add_seabios()
{
_seabioself="elf/seabios/default/$initmode/bios.bin.elf"
cbfs "$tmprom" "$_seabioself" "fallback/payload"
x_ "$cbfstool" "$tmprom" add-int -i 3000 -n etc/ps2-keyboard-spinup
_z="2"; [ "$initmode" = "vgarom" ] && _z="0"
x_ "$cbfstool" "$tmprom" add-int -i $_z -n etc/pci-optionrom-exec
x_ "$cbfstool" "$tmprom" add-int -i 0 -n etc/optionroms-checksum
[ "$initmode" = "libgfxinit" ] && \
cbfs "$tmprom" "$seavgabiosrom" vgaroms/seavgabios.bin raw
[ "$payload_memtest" = "y" ] && cbfs "$tmprom" \
"elf/memtest86plus/memtest.bin" img/memtest
[ "$payload_grub" = "y" ] && add_grub
cprom && [ "$payload_grub" = "y" ] && pname="seagrub" && mkseagrub; :
}
add_grub()
{
cbfs "$tmprom" "$grubelf" "img/grub2"
printf "set grub_scan_disk=\"%s\"\n" "$grub_scan_disk" \
> "$TMPDIR/tmpcfg" || $err "$target: !insert scandisk"
cbfs "$tmprom" "$TMPDIR/tmpcfg" scan.cfg raw
}
mkseagrub()
{
cbfs "$tmprom" "$grubdata/bootorder" bootorder raw
for keymap in config/data/grub/keymap/*.gkb; do
[ -f "$keymap" ] && cprom "${keymap##*/}"; :
done; :
}
add_uboot()
{
ubdir="elf/u-boot/$target/$uboot_config"
ubootelf="$ubdir/u-boot.elf" && [ ! -f "$ubootelf" ] && \
ubootelf="$ubdir/u-boot"
[ -f "$ubootelf" ] || $err "cb/$target: Can't find u-boot"
cbfs "$tmprom" "$ubootelf" "fallback/payload"; cprom
}
cprom()
{
newrom="bin/$target/${pname}_${target}_$initmode$displaymode.rom"
[ $# -gt 0 ] && newrom="${newrom%.rom}_${1%.gkb}.rom"
x_ mkdir -p "bin/$target"
x_ cp "$tmprom" "$newrom" && [ $# -gt 0 ] && \
cbfs "$newrom" "config/data/grub/keymap/$1" keymap.gkb raw; :
}
mkcoreboottar()
{
[ "$target" = "$tree" ] && return 0; [ "$XBMK_RELEASE" = "y" ] && \
[ "$release" != "n" ] && $dry mkrom_tarball "bin/$target"; :
}